The Flashforge Creator Pro enables you to make more advanced 3D prints, with it's two extruder direct drive system. This makes it possible to use two materials in your print. For example PLA and PVA filament to create prints with soluble supports. The Creator pro is pre assembled and plug-and-play. After installing the provided software, you can immediately start 3D printing!
The Creator Pro is controlled using an easy user-interface on a LCD screen. You can either print from SD card or directly from your PC over USB. For your convenience there is a LED light which can be turned on to light up the print area. The metal frame creates a sturdy housing that will heat up with the heated buildplate, so printing ABS or other advanced materials will be easier.The Flashforge comes with the FlashPrint software, but the printer will also work with other slicer software,
Included with the printer is also:
|3D printer properties|
The maximum volume what can be 3D printed with this machine. This normally is almost the size of the printbed times the height the head can be above the bed.
|Resolution X axis||0.2 mm|
|Resolution Y axis||0.2 mm|
|Layer resolution||0.1 mm|
|Number of extruders||2|
|Nozzle diameter||0.4 mm|
|Filament diameter||1.75 mm|
|Hot-end type||MK10 Compatible|
|Max. hot-end temperature||240 °C|
Bowden printers feed filament through a tube as opposed to Direct Drive systems. This adds important advantages (faster printing) and disadvantages (higher filament retraction settings). You can find more information on Direct Drive and Bowden systems, Click here
|Max. heated bed. temp.||120 °C|
|Type of 3D printer||FDM/FFF|
Bed movement direction
The direction the buildplate moves. Most printers move the build plate in the Y-axis direction. This is a simpler design, but gives problems at greater build height, because the inertia of the mass of the buildplate + 3D print impact the quality of the layers, requiring you to limit the speed. Other printers move in the Z-axis, allowing you to print faster without trading quality of the layer build-up.
|Product Dimensions||360x526x550 mm|
Compatible diameter filament
This product is compatible with the specified filament diameter.
|Display type||Graphical LCD|
|Type of control interface||Button pad|
A SD Card in your printer will allow you to store prints and print them directly from SD. This is more reliable than a USB connection and allows you to power down your computer.
A heated bed is important to reduce Warping and have a better adhesion of the 3D print to the print bed.
This machine has an enclosure to protect the print or product from outside influences.
|Input voltage||110/240 V|
|Operating voltage||24 V|
Find useful replacement parts and components for the Creator Pro. Ensure smooth operation and keep your Creator Pro in the best condition with our series of spare parts. Easily order spare parts for replacement or to store in your inventory.
Discover all the parts and accessories that you can use with the Creator Pro. These products are here to support your project at every step of the way. Select premium supplies that provide expert solutions.